No products
Prices are tax included
Individual products & accessories
- 178,80 € tax incl. 18In Stock
Equipped with a pressure reducer and pressure gauge
Countercurrent washing without water shut-off.
Advantages:- filtration of solid impurities such as sand, rust, limescale, etc;
- can be installed on vertical, horizontal or angled pipes
- 1" and 3/4" universal connector (26/34 and 20/27)
- system BACKWASH - simple reverse flush operation. Just one valve to open or automate!
- rinsing water can be drained directly into the sewage system
- system TWIST & CLEAN - cleaning the filter housing from the inside without having to turn off the water from the system
An upgradeable system
Optional: add the electronic box to automate backwashing - 29,90 € tax incl. 34,80 € 59In StockReduced price!
BPA-free modular filter holder
- Bare model without connectors
- remember to add accessoriesCan be used with standard 10" inch cartridges:
- activated carbon filter(taste + odour + pollutants)
- sediment filter(retains organic impurities)
- sediment and activated carbon filter(2 in 1 cartridge)
- anti-iron filter(eliminates rust - brown colour)
Cartridges and connectors can be seen at the bottom of the page
- 7,68 € tax incl. 27In Stock
You've dropped your bowl and it's broken.
Here's the complete replacement part:
- the bowl (BPA-free)
- the O-ring
- the purge complete with locking shim
- the clamping locking system - 4,80 € tax incl. 78In Stock
An essential accessory for filter doors.
These rings make it easy to centre the filter cartridges so that they are properly aligned when reassembled.
- 3,30 € tax incl. 43In Stock
A simple, effective spanner
to loosen the tanks of your modular filters. - 3,00 € tax incl. 36In Stock
Connect your modular filter holders together easily.
This accessory provides an instant seal without the need for screws or consumables. - 3,00 € tax incl. 967In Stock
Easily install your modular filter holder with these two 20/27 (3/4") connectors.
These accessories allow you to adapt the two outlets of the filter holder to the thread size required for your project. - 3,00 € tax incl. 4In Stock
Easily install your modular filter holder with these two 26/34 (1") connectors.
These accessories allow you to adapt the two outlets of the filter holder to the thread size required for your project.
Discover our individual filtration products and accessories for equipping, completing or upgrading a system designed to treat rainwater, spring water, borehole water or well water. This category brings together equipment available separately so that you can adapt your installation to the quality of your water and your specific requirements.
The equipment available here can be used to build a customised filtration system, replace an existing component or complement one of our filtration packs. Filter cartridges and UV water sterilizers now have their own dedicated categories to make selection easier.
Filtration equipment sold separately
Water prefiltration and filtration
Depending on the source of the water and the characteristics of your installation, different components can be combined to provide particle prefiltration followed by finer filtration. They can also be installed upstream of other water treatment stages.
Filter housings and modular components
Filter housings and modular filtration components make it possible to build a single, double or multi-stage treatment system. This modular design also makes it easier to upgrade the installation later if your requirements change.
Fittings and installation accessories
You will also find accessories for connecting, installing, maintaining or upgrading your filtration system. Accessories should be selected according to pipe diameter, required flow rate and the configuration of the installation.
A treatment system adapted to your water
A water treatment installation does not necessarily require the same components when treating rainwater, spring water, borehole water or well water. The amount of suspended particles, the possible presence of dissolved substances and the microbiological quality of the water may require different treatment stages.
To simplify the selection of the different components, you can also choose one of our filtration packs for rainwater, spring water, borehole water or well water. These solutions combine several filtration stages selected to work together.
Filter cartridges and UV sterilisation
Dedicated categories to help you choose
To make navigation easier, all our water filter cartridges are grouped in a dedicated category. Our UV water sterilizers also have their own section, making it easier to choose a model suited to the flow rate of your installation.
For water from a well, borehole or spring, a water analysis is recommended to determine which treatments are actually required and to correctly size the different filtration stages.
English 
Français 
Deutsch 
Italiano 
Español 
Belgium