No products
Prices are tax included
4 in 1 water purifier
4 filtration levels in a single cartridge!
High autonomy cartridge: 7500 litres from 2 to 3 years without replacement!
Treat yourself to German quality!
Tap water is often loaded with:
- chlorine
- aluminium salts
- pathogens
- drug residues
- pesticides
- unwanted particles (sand, rust, fibres...)
- heavy metals
HIGH EFFICIENCY WATER PURIFIER 0.01 MICRONS
4 filtration levels in a single cartridge High-end German
manufacturing
It is thanks to the adoption of advanced three-dimensional composite filtration technology that this water filter was made possible. It is also equipped with backwashing technology that will extend the life of the cartridge. It consists of four fine filtration steps of optimal quality.
Silver plated stainless steel filter - Sediment filter - Activated carbon filter - Polypropylene fiber filter, 0.01 micron ultrafiltration membrane - a quality of components that will guarantee you a high level result.
Microfiltration 0.01 micron
 |
 |
The 4 in 1 water filter - Auxiliary tap (mounting accessories included)
- Quadruple protection in a single cartridge.
- Sediment filtration (set of particles suspended in water.)
- Activated carbon against chlorine, heavy metals, medicines..
- Microorganisms are blocked by the ultrafiltration membrane
- No more unpleasant smells
- Recover the pure taste of your water.
- Preserves the beneficial minerals and trace elements of water
- Ecological and economical unlike bottled water
- Small footprint and easy installation
- Manual backwashing system
LABORATORY TEST RESULTS AND PROVEN EFFECTIVENESS
Our water purification system has been tested by independent laboratories.
The analyses were carried out by the Biotechnological Institute IBIB and Biolineacom.
Specific tests were performed for total coliforms, E. coli ß-glucuronidasa positive, enterococci, Clostridium spores, odour, colour, turbidity, pH, conductivity at 20°C, all dissolved solids, ammonium (NH4), nitrite (NO2), nitrate (NO3 ), bicarbonate (HCO3), total alkalinity (TAC), calcium (Ca), magnesium (Mg), total hardness, free chlorine, Langelier Index.
The filters have passed the tests in all respects, you can see the documents in the "download" tab.
All SYR products are certified according to the ISO 9001 quality management system.
INSTALLATION OF THE 4 IN 1 FILTER
The Water Purifier is supplied in a ready-to-install package. The installation is quite simple, it can be easily done by a handyman without the need to weld.
Simply unscrew the cold water connection from your tap and connect a T to it to supply the tap and filter. You can also use a self-drilling tap and connect to a copper pipe without having to disassemble anything.
The Purifier Pack is easy to install under a sink.
4 in 1 filter operation
Spring water available for everyday use
We offer you the only backwashable filter in the world to date to be completed in the same 4-level filter cartridge. First of all, the water will be treated by a first double filtration which will stop the macromolecules. Then a third filtration with high density activated carbons which will retain the harmfulness of pollutants such as heavy metals, drug residues and pesticides. A 4th filtration step at 0.1 microns thanks to the ultrafiltration membrane will definitively block the way to viruses, bacteria, fungi and others...
In your home, you are guaranteed impeccable water treatment free of viruses, bacteria, pesticides or drug residues.
FREQUENTLY ASKED QUESTIONS ABOUT THE SYSTEM
- Hello, I would like information about your 4-level water filtration device. If I understand correctly once the 7500 liters it is necessary to buy a complete device or can we change only the cartridge?
- Dear customer,
the 7500 litres will be used in 2 - 3 years for about 4 people (7 litres per day x 365 days x 3 years = 7665 litres)
. It will be necessary to replace the cartridge at that time, it costs about 180 euros depending on the price variations and shipping costs are free.
__
- Hello, for the manual backwashing system could we know more about it, it's to do every how long and how long?
Our answer: backwashing can be done once every 2-3 months using 1 litre of rinsing water. To do this, simply reverse the tap on the top of the filter and drain it from below.
It is not mandatory but will extend the life of your filter.
You will feel the need to change it when you feel the taste and smell of chlorine again. (he treats chlorine.)
__
- I would also like to treat limescale on my water network as well as chlorine but I didn't see anything for chlorine do you do this product?
Thank you very much.
The answer: For limestone you can choose the solution Suprion + purifier for chlorine. At the beginning of your installation you can install a double water filter that will roughen the quality of your water by treating sediments as well as some heavy metals, chlorine etc....
The advantage of the Suprion is that it is very effective throughout your home network, curative and good value for money.
This system will advantageously replace an osmosis plant!
Indeed, the reverse osmosis units, although very efficient, take up much more space, must also be equipped with a drain. They will consume much more filter cartridges and especially water!
Even with a very good osmosis plant, a litre of purified water is 3 litres of water released into the environment, which is not even recommended to be used for plants since it is loaded with all the undesirable elements of the one that has been purified!
For a quality water without constraints we recommend this 4-step filter.
(7)
(1)
(0)
(0)
(0)
(0)
Très bien
-
Magnetic anti-limestone magnet 12800 gauss Max Power
160,00 € 210,00 € -
Ecological anti-limestone Suprion JS-12e15
383,04 € 478,80 € -
9,00 €
English 
Français 
Deutsch 
Italiano 
Español 
Polski 
Türkçe 
Svenska 
Nederlands