No products
Prices are tax included
Equipped with a pressure reducer and pressure gauge
Countercurrent washing without water shut-off.
Advantages:
An upgradeable system
Optional: add the electronic box to automate backwashing
An essential accessory for its self-cleaning filter.
This electronic unit automatically triggers the backwash, so all you have to do is forget about it...
It is mains-powered and battery-powered.
- compact dimensions
- versatile installation direction
- with pressure gauge connection
- 3/4 (20/27) female threads
1/4" radial pressure gauge - DN 50
Ideal for mounting on our pressure regulator/limiter.
Allows you to quickly check the pressure in your water network.
- Graduations from 0 to 16 bar
- Bare model without connectors
- remember to add accessories
Can be used with standard 10" inch cartridges:
Cartridges and connectors can be seen at the bottom of the page
A simple, effective spanner
to loosen the tanks of your modular filters.
An essential accessory for filter doors.
These rings make it easy to centre the filter cartridges so that they are properly aligned when reassembled.
You've dropped your bowl and it's broken.
Here's the complete replacement part:
- the bowl (BPA-free)
- the O-ring
- the purge complete with locking shim
- the clamping locking system
Connect your modular filter holders together easily.
This accessory provides an instant seal without the need for screws or consumables.
Easily install your modular filter holder with these two 20/27 (3/4") connectors.
These accessories allow you to adapt the two outlets of the filter holder to the thread size required for your project.
Easily install your modular filter holder with these two 26/34 (1") connectors.
These accessories allow you to adapt the two outlets of the filter holder to the thread size required for your project.
Easily install your modular filter holder with these two 15/21 (1/2") connectors.
These accessories allow you to adapt the two outlets of the filter holder to the thread size required for your project.
Easily use your modular filter holder with these two 6 mm (1/4") tube connectors.
These accessories allow you to adapt the two outlets of the filter holder to a 1/4" automatic connector.
A dedicated product for connecting a filter / filter holder
It is very useful in plumbing:
No products
Prices are tax included