No products
Prices are tax included
Allows you to create 2 filtration stages
and easily add more later.
Bisphenol A-free product, made in Europe
Depending on the cartridges used:
Don't forget to order the appropriate 10" inch cartridges.
These filter holders can be easily fitted together, without screwing or sealing work, to provide several stages of filtration.
Modular connections also have the advantage of turning on themselves, which means there are no screwing/angle constraints when you're close to the wall and need to use an elbow for the connection.(see video)
You can start with 2 filter doors and easily add more later if required.
This product is made in Poland to a very high European standard.
The dimensions of the filter are:
It is supplied with :
This filter holder is made from recycled plastic and is also completely recyclable!
Operating temperature from 2° to 35°C
As an option, you can choose the basic pack of filter cartridges to be used:
This pack will allow you to filter your water for up to 3 years. Generally, each cartridge is changed between 6 and 12 months depending on the quality of the water.
Whether you're treating mains water, rainwater, spring water or water from a borehole or well, this filter holder is ideal for using filtration and treatment cartridges tailored to your needs.
You'll find the different types of treatment cartridge in the options to tick after this description.
As the first stage of filtration, use a sediment filtration cartridge to obtain clear, limpid water in which all suspended organic impurities have been removed.
We recommend using a washable or disposable 5-micron sediment cartridge. This level of filtration enables the water to be clarified to the extreme without losing too much pressure or flow. It is also essential for treating bacteria with a UV steriliser.
A self-cleaning filter is recommended before this first stage if you are using borehole water, spring water, water from a well or rainwater recovery.
This pre-filter removes the largest impurities without having to replace cartridges, and can be cleaned by backwashing. This pre-filter eliminates the largest impurities without having to replace cartridges.
Before the final filtration stage, we use activated carbon blocks, which act on harmful elements solubilised in the water.
We recommend using a 10 micron cartridge. The fineness of the carbon serves to retain the water in contact with the carbon for as long as possible. This has nothing to do with the filtration of 5 micron sediments.
Finer filtration with activated carbon block would result in insufficient flow to supply a dwelling.
Activated charcoal is a natural detoxifier with a very high adsorption capacity, so it can quickly help to purify our bodies and the water we drink.
Thanks to its extreme porosity and adsorption capacity, activated charcoal is capable of retaining many contaminants.
It is effective against chemicals, pesticides, solvents and volatile organic compounds, heavy metals, nitrates, pfas, chlordecone, drug residues and food additives....
As the final filtration stage, granular activated carbon (GAC ) is used to supplement block activated carbon and retain pollutants that the latter is unable to eliminate. (It is more effective on VOCs, for example).
Activated carbon is made up of small pieces of coal, in granular or block form, which have been treated to make them extremely porous.
1 gram of activated carbon has a surface area of between 500 and 3,000 m2.
To give you an idea of this surface area, 4 grams of activated carbon is equivalent to the surface area of an entire football pitch! It is precisely this enormous surface area that makes the carbon filter so incredibly effective at adsorbing and eliminating impurities as well as more complex substances.
After the first filtration stage and before the activated carbon cartridges, which come last, you can use specific filtration cartridges.
Some contaminants in the water cannot be eliminated by activated carbon, so you will need to use appropriate cartridges, such as our anti-iron filtration cartridge, which will reduce iron/manganese levels, or our FLAR cartridge, which retains arsenic and fluoride.
While many people try to get rid of limescale, some don't have enough minerals and are faced with problems of oxidation/degradation of their equipment. Using an osmosis unit removes pollutants but eliminates minerals, which is not good for our body's acid-base balance.
We therefore also offer a "mineralising cartridge" to combat these problems.
It would be tempting to use just one very fine filter, but this is not advisable, as the flow rate will be too low!
Filter cartridges can be compared to a sieve or a funnel. If the strainer is too big, all the small impurities can pass through, but if the strainer is too fine, it quickly clogs up and lets almost nothing through, and neither does the water...
That's why we use several filters of different finenesses, one behind the other. This means that the cartridges don't clog up as quickly and are more efficient. It also ensures that the correct flow rate is maintained for all appliances.
Don't forget the cartridges!
Why not add an anti-scale filter to your purchase? It'll be the perfect companion for your filter for even greater efficiency!
![]() |
Disregard this box, which is not a product. The total will be updated at the bottom of the options and on the product price. |
![]() |
Filter cartridge centring device An essential accessory for filter doors. These rings make it easy to centre the filter cartridges so that they are properly aligned when reassembled. |
![]() |
A cheap price for your activated carbon and sediment filter cartridges |
![]() |
Pleated washable cartridge - 5 microns Washable, longer-lasting cartridges!
For standard 10" inch filter holder. |
![]() |
Activated carbon cartridge Block 10 inch 10 microns Replacement cartridge for activated carbon filtration 10 µm.For 10 inch filter doors. |
![]() |
5 micron sediment cartridge 10 inches Efficient deposit filtration.
For 10-inch filter holders. |
![]() |
Specifically designed to remove iron, manganese and hydrogen sulphide
|
![]() |
Activated carbon cartridge - GAC Coconut granule activated carbon
High-efficiency cartridge.
|
![]() |
Silver activated carbon cartridge - KDF GAC NS Bacteriostatic activated carbon
Anti-bacterial.
Cartridge suitable for 10-inch filter doors. |
![]() |
Mixed cartridge - activated carbon - sediment Unique filtration cartridge for the whole house!Ideal for use with a 1-tank water filter compact 2-in-1 cartridge:
The essentials of water treatment in a single filter cartridge. |
![]() |
Anti-fluorine and arsenic cartridge - FLAR For 10-inch filter holder - FLAR
|
![]() |
3/4’ connector (20-27) for modular filter Install your modular filter holder easily with these 20/27 (3/4") connectors |
![]() |
1-inch connector (26-34) for modular filter Install your modular filter holder easily with these 26/34 (1") connectors |
![]() |
1/2 connectors (15-21) for modular filter Install your modular filter holder easily with these 15/21 (1/2") connectors |
![]() |
Double connector for modular filter Connect your modular filter holders together easily. |
![]() |
Disregard this box, which is not a product. The total will be updated at the bottom of the options and on the product price. |
![]() |
Anti-limestone magnet 10800 gauss Mi Power Recommended for a small home.
|
![]() |
Magnetic anti-limestone magnet 12800 gauss Max Power Recommended for a house or company...
|
![]() |
Ecological anti-limestone Suprion JS-12e15 Ecological limescale remover suitable for homes with up to 2 bathrooms Effective up to 1.8 m³/hour A major evolution in water treatment. This product is WRAS certified, recommended and guaranteed by The British Gas (historical gas supplier in England.) |
![]() |
Salt-free ecological water softener Suprion JS-75e22 Suitable for homes with 2 or more bathrooms Effective up to 3.4 m³/hour WRAS certified, validated by the National Energy Distributor in the United Kingdom: British Gas - a real guarantee of results |
![]() |
We have designed this assembly kit for an easier and seamless adaptation to your piping system. |
- Bare model without connectors
- remember to add accessories
Can be used with standard 10" inch cartridges:
Cartridges and connectors can be seen at the bottom of the page
Connect your modular filter holders together easily.
This accessory provides an instant seal without the need for screws or consumables.
Install your modular filter holder easily with these 20/27 (3/4") connectors
These accessories allow you to adapt the 2 outlets of the filter holder to the screw pitch required for your project.
A simple, effective spanner
to loosen the tanks of your modular filters.
No products
Prices are tax included