No products
Prices are tax included
Filters or pre-filters allow you to clean the water by removing the coarsest elements (sand, sludge, pieces of limestone, rust...), some filter cartridges allow you to refine this result by retaining part of the heavy metals, pesticides, micro plastics...
If your objective is to obtain better quality drinking water, you should opt for a water purifier which can be installed on its own but which will clog up less quickly if you are equipped with this type of filter upstream.
1 silicone gasket
Provide a tight seal between the quartz tube and the stainless steel reactor.
Connect your modular filter holders together easily.
This accessory provides an instant seal without the need for screws or consumables.
Easily install your modular filter holder with these two 20/27 (3/4") connectors.
These accessories allow you to adapt the two outlets of the filter holder to the thread size required for your project.
Easily install your modular filter holder with these two 26/34 (1") connectors.
These accessories allow you to adapt the two outlets of the filter holder to the thread size required for your project.
Easily install your modular filter holder with these two 15/21 (1/2") connectors.
These accessories allow you to adapt the two outlets of the filter holder to the thread size required for your project.
Easily use your modular filter holder with these two 6 mm (1/4") tube connectors.
These accessories allow you to adapt the two outlets of the filter holder to a 1/4" automatic connector.
A simple, effective spanner
to loosen the tanks of your modular filters.
A dedicated product for connecting a filter / filter holder
An essential accessory for filter doors.
These rings make it easy to centre the filter cartridges so that they are properly aligned when reassembled.
For 10-inch filter holders.
You've dropped your bowl and it's broken.
Here's the complete replacement part:
- the bowl (BPA-free)
- the O-ring
- the purge complete with locking shim
- the clamping locking system
For standard 10" inch filter holder.
1/4" radial pressure gauge - DN 50
Ideal for mounting on our pressure regulator/limiter.
Allows you to quickly check the pressure in your water network.
- Graduations from 0 to 16 bar
Ideal for use with a 1-tank water filter
and those who are short of space.
compact 2-in-1 cartridge:
The essentials of water treatment in a single filter cartridge.
For standard 10" inch filter holder.
High-efficiency cartridge.
Fits a 10-inch filter holder.
Specifically designed to remove iron, manganese and hydrogen sulphide
Anti-bacterial.
Cartridge suitable for 10-inch filter doors.
For 10-inch filter holder - FLAR
Electronic control unit specific to the UVc steriliser
It allows a UVc lamp to operate continuously.
It is equipped with a red or green LED that lights up depending on the status of the lamp.
Electronic control unit specific to the UVc steriliser
It allows a UVc lamp to operate continuously.
It is equipped with a red or green LED that lights up depending on the status of the lamp.
- compact dimensions
- versatile installation direction
- with pressure gauge connection
- 3/4 (20/27) female threads
- Bare model without connectors
- remember to add accessories
Can be used with standard 10" inch cartridges:
Cartridges and connectors can be seen at the bottom of the page
- Silica glass tube.
This is a high quality type of glass composed almost exclusively of pure silica.
A cheap price for your activated carbon and sediment filter cartridges
You can store them and benefit from an advantageous price.
- Silica glass tube.
This is a high quality type of glass composed almost exclusively of pure silica.
Complete replacement filter
40 + 90 micron stainless steel screen and integrated wiper system.
Gaskets are already installed.
Complete replacement filter
100 + 200 micron stainless steel screen and integrated wiper system.
Gaskets are already installed.
No products
Prices are tax included