Cookie Consent by PrivacyPolicies.com

10-inch remineralising cartridge

This mineralising cartridge guarantees optimal water quality, similar to that of natural mineral water.

  • enriches water with minerals and elements
  • increases the pH of the water
  • improves the taste of water
  • partially removes impurities (sediment)

More details

New product

13,80 € tax incl.

- +

 
More info

An extra supply of minerals for rich, balanced water


The MIN mineralising cartridge is a solution that enriches water with minerals and elements essential for health, such as calcium carbonate, magnesium carbonate and small amounts of ions: iron, aluminium, silicon, manganese, zinc and copper.

Why is it necessary to remineralise water?

  • locally, the water may be low in minerals
  • minerals are beneficial to health
  • Some people will not like the taste of water that has been overly demineralised.

Even though the bioavailability of minerals in water is low, they are important for the acid-base balance of our body. More and more water specialists and naturopaths recommend installing this type of cartridge after water purification or osmosis.

Water osmosis and purification

Reverse osmosis is a process that removes all components from water. After years of experience and research, many scientists have revised their opinion on the daily consumption of this water. Due to its highly unstable pH and lack of minerals, it has been found to have an overly "flushing" effect on the body.

Osmosis water removes pollutants, but also all the good elements and minerals that are beneficial to health.
Consuming osmosis water is therefore recommended for short periods only and should be considered solely as a treatment.

Just a reminder: plants watered with osmosis water, or fish living in this water, would not survive for long. Therefore, it is not natural water.

Water purification is another technique that is slightly less effective but much more natural. It only removes pollutants and has little effect on the minerals and trace elements in the water. It is a more respectful solution for our bodies, allowing us to consume pure, natural water on a daily basis. In this case, this cartridge will only be necessary if the water you have purified was not initially sufficiently mineralised.

Features

  • Size: 10 inches
  • Dimensions: 251 ± 1.5 x 73 ± 1 mm
  • Lifespan: 6 to 9 months
  • Operating temperature: 2 to 40°C
  • Flow rate: 6 l/min

This cartridge is compatible with all standard 10-inch filter holders (not suitable for 9 3/4-inch holders).

 
Reviews

Click here to leave a review

Pack contents and options to choose from

Cartouches de filtration

You can add options

You can add options

0,00 €

Disregard this box, which is not a product.
If you want one or more paying options in addition, tick the corresponding box(es) and choose the quantities.

The total will be updated at the bottom of the options and on the product price.
Then simply click on add.

Filter cartridge centring device

Filter cartridge centring device

4,80 €

An essential accessory for filter doors.

These rings make it easy to centre the filter cartridges so that they are properly aligned when reassembled.

Straight push-fit tube fitting 1/4 - 1/4 (6mm - 6mm)

Straight push-fit tube fitting 1/4 - 1/4 (6mm - 6mm)

2,70 €

Straight push-fit fitting for 1/4 - 1/4 - plastic food pipe tolerances from 6 mm to 6.5 mm (1/4 inch)

Reduction fitting for 3/8" to 1/4" tubes

Reduction fitting for 3/8" to 1/4" tubes

4,50 €

This type of fitting allows you to adapt a 3/8" tube to a 1/4" inch tube
3/8" corresponds to 9.52mm with a tolerance of approximately 8 to 10mm.
1/4" corresponds to 6.35mm with a tolerance of approximately 6 to 7mm

1/4’ (6 mm) tube connectors for modular filter

1/4’ (6 mm) tube connectors for modular filter

3,00 €

Easily use your modular filter holder with these two 6 mm (1/4") tube connectors.
These accessories allow you to adapt the two outlets of the filter holder to a 1/4" automatic connector.

Water filter

Water filter

29,90 €

BPA-free modular filter holder

- Bare model without connectors
- remember to add accessories

Can be used with standard 10" inch cartridges:

  • activated carbon filter(taste + odour + pollutants)
  • sediment filter(retains organic impurities)
  • sediment and activated carbon filter(2 in 1 cartridge)
  • anti-iron filter(eliminates rust - brown colour)

Cartridges and connectors can be seen at the bottom of the page

Modular filter door key

Modular filter door key

3,30 €

A simple, effective spanner
to loosen the tanks of your modular filters.

Tube for osmosis - purifier - fridge

Tube for osmosis - purifier - fridge

1,92 €

Hose for osmosis machine - water purifier - refrigerator.
Diameter 6.35 mm - 1/4 " inch.

Sold by the meter.

1/2 connectors (15-21) for modular filter

1/2 connectors (15-21) for modular filter

3,00 €

Easily install your modular filter holder with these two 15/21 (1/2") connectors.
These accessories allow you to adapt the two outlets of the filter holder to the thread size required for your project.

3/4’ connectors (20-27) for modular filter

3/4’ connectors (20-27) for modular filter

3,00 €

Easily install your modular filter holder with these two 20/27 (3/4") connectors.
These accessories allow you to adapt the two outlets of the filter holder to the thread size required for your project.

Double connector for modular filter

Double connector for modular filter

3,00 €

Connect your modular filter holders together easily.
This accessory provides an instant seal without the need for screws or consumables.

Related products

No products

To be determined Shipping
0,00 € Of which taxes of
0,00 € Total incl. taxes

Prices are tax included

Check out