No products
Prices are tax included
4 filters in 1 in a single cartridge for better-tasting, more effectively filtered water every day.
Up to 7,500 litres of capacity, with replacement recommended at the latest every 3 years.
German SYR expertise, in a complete kit including a single-tap system designed for purified water.
Depending on the water supply network and the infrastructure, tap water may contain or carry:
This pack combines the SYR POU 7315 water filter unit – a 4-in-1 filter system – with a T-joint and an additional single-tap outlet, providing purified water specifically for the sink. A practical, compact solution that is easy to install under the sink.

This pack is designed as a complete solution. The aim is to avoid any uncertainty about which items to order separately and to provide you with a comprehensive kit that is ready to install under the sink.

The SYR POU max combines four filters in a single unit: two mesh filters to remove impurities, an activated carbon filter and an antibacterial filter. This compact design combines particle filtration, taste and odour improvement, and additional point-of-use protection in a single unit.
In practical terms, this filter helps to trap impurities such as sand, rust and fibres, improves the taste and smell of the water, and reduces various unwanted residues. Activated carbon is particularly effective against chlorine, certain odours, pesticides, organic residues, as well as certain heavy metals and certain PFAS, depending on water quality and actual conditions of use.
The filtration rating is specified here as 0.15 microns, which allows for very fine filtration whilst remaining a compact and practical solution for everyday use.
The cartridge offers a long service life of up to 7,500 litres. Depending on usage and water quality, its service life can be up to 3 years. Even if this capacity is not reached, it is recommended that you replace the cartridge after 3 years to maintain optimal filtration performance.
The system also features a manual backwash, which helps to minimise clogging and extend the filter’s service life using only a small amount of rinse water.
The main advantage of this version is its simplicity. The dedicated small tap allows you to reserve a specific water outlet for purified water, without replacing the existing mixer tap. This is often the most practical solution if you want to keep your current taps.
This version is also popular because it is more affordable than the version with a three-way tap, whilst retaining the same filtration system. It is ideal for households looking for purified water for drinking and cooking, with a simple under-sink installation.

The water purifier connects to the cold water supply using the T-piece supplied in the pack. The unit is designed to be installed under the sink, just before the tap. The aim of this system is to treat the water directly at the point of use, where it is actually drunk and used for cooking.
The installation is straightforward for anyone handy with DIY, requires no soldering, and features a simple, compact design. You simply need to ensure there is enough space under the sink, particularly if you also want to be able to backflush the system easily.
This water purifier offers advanced filtration without relying on reverse osmosis. It is easier to use on a day-to-day basis, takes up less space under the sink and does not require a constant flow of waste water.
Another key advantage is that this system retains the minerals naturally present in the water and does not seek to completely strip the water of its beneficial dissolved elements. For many users, this strikes a good balance between fine filtration, convenience, simplicity and the natural taste of the water.
You can find the documents available on the current page: manual, laboratory tests and analyses, and quality certification.
The pack contains the complete water filter unit with its cartridge, the additional single-way stainless steel tap, the T-joint, the 1/4-inch connectors and the connecting pipe.
Because the system combines two mesh filters, an activated carbon filter and an antibacterial filter in a single compact unit.
It helps trap impurities, improves the taste and smell of the water, and helps reduce chlorine, certain pesticides, certain organic residues, certain heavy metals and certain PFAS, depending on water quality and conditions of use.
The cartridge must be replaced after a maximum of 7,500 litres, or after 3 years at the latest if this capacity has not been reached.
Because it allows you to keep your existing taps and have a separate, simple and cost-effective purified water supply at the sink.
The tutorial for installing and setting up your water purification system.
The dimensions of the tap:

Cartridge Dimensions :

View of the elements :

| Disregard this box, which is not a product. The total will be updated at the bottom of the options and on the product price. |
| Vortex Water Dynamiser for Purifiers and Osmosis Systems The Whirlator EWYThis device is used to dynamise water by creating a vortex that stirs and accelerates the water's circulation. A system inspired by the major discoveries of Viktor Schauberger, which has not yet finished surprising us... |
| 1/4" water pressure reducer for osmosis / purification unit This regulator protects water purifiers, osmosis units and other appliances. Some homes don't have a pressure relief valve to protect their pipes, so this accessory is needed to prevent water hammer and excessive pressure in the pipes. |
| Dismantling key filter water purifier 4 in 1 Cette clef vous permettra de visser/dévisser la cartouche de votre purificateur d'eau 4 en 1 pour la remplacer. |
| Replacement cartridge for 4 in 1 water purifier 4 filtration stages in a single cartridge! German quality! |
| Water meter for filter or osmosis system Plan to change your filters when needed with our water meter. This water meter will be very useful to quantify the volume of water that has passed through your filters. |
| 3/4 pressure reducer with pressure gauge connection Protect your household appliances, water heaters, boilers and heat pumps....- compact dimensions |
| Standard pressure gauge for drinking water 1/4" radial pressure gauge - DN 50 Ideal for mounting on our pressure regulator/limiter. |

No products
Prices are tax included