No products
Prices are tax included
The 12800 Gauss Max Power magnetic limescale inhibitor is a simple and sustainable solution for protecting your home against limescale build-up – no salt, no electricity and no chemicals required.
Ideal for reducing limescale build-up in pipes, water heaters, taps and household appliances on a daily basis.
The 12,800 Gauss Max Power magnetic limescale inhibitor protects your home from limescale build-up without using salt, electricity or chemicals.
Ideal for preventing limescale build-up in pipes, water heaters and household appliances.
The limescale in the water can cause limescale build-up in pipes, water heaters and household appliances. The 12,800 Gauss Max Power magnetic limescale inhibitor offers a simple and eco-friendly solution to reduce limescale build-up throughout the home.
Unlike a traditional water softener, this system operates without salt, electricity or maintenance. It works by using a powerful magnetic field to alter the structure of limescale crystals, thereby preventing them from building up in the pipes.

In many areas, the water is naturally rich in calcium and magnesium. This hard water can cause limescale to build up in pipes and household appliances.

The device contains very powerful neodymium magnets that create a magnetic field around the pipe. When water flows through this area, the crystalline structure of the calcium carbonate is altered.
The limescale then becomes less likely to build up and is less likely to settle on surfaces such as heating elements, pipes, taps or shower screens.

For maximum effectiveness, we recommend installing the magnetic limescale inhibitor on the main water supply pipe. This ensures that all the water in the house passes through the magnetic field before reaching the appliances.
| Criterion | Magnetic limescale inhibitor | Water softener |
|---|---|---|
| Installation | Simple | More complex |
| Interview | None | Salt + maintenance |
| Electricity | Non | Often, yes |
| Environmentally friendly solution | Oui | More restrictive |
The 12,800 Gauss Max Power magnetic limescale inhibitor is particularly well suited to households looking for a long-term solution to minimise the effects of limescale without having to install a bulky or cumbersome system.

It does not remove the limescale in the water, but alters its structure so that it adheres less to surfaces.
Yes, installation is straightforward and does not usually require any major building work.
Yes, for those looking for a simple, eco-friendly and maintenance-free solution to limescale build-up.
It is recommended that you install it on the main water pipe to protect the entire domestic water system.
How does a magnetic limescale inhibitor work? Does it actually work? Do the magnets wear out? Does it remove limescale?
This system can be fitted to all types of non-magnetic pipes. It can therefore be used on plastic, copper, aluminium pipes, etc.
You can check whether your hose is compatible using a small magnet or a fridge magnet:
If the pipe isn’t compatible, the solution is to make a sleeve about ten centimetres long using a compatible pipe. This could also be a good opportunity to fit a filter if you don’t already have one.
The magnetic field does not cause any problems with other common electrical appliances. You simply need to be careful with small devices such as watches, calculators or magnetic bank cards if they are placed nearby.
It is advisable to install the system as close as possible to the equipment requiring protection against limescale. Beyond 40 metres, performance will be significantly reduced.
Magnetic limescale inhibitors only prevent limescale from forming; they do not instantly remove limescale deposits from the water supply system.
Nor do they remove sludge, sand and other impurities that also come from the mains supply.
Over time, iron filings or particles may also accumulate on the magnet, reducing its effectiveness. This is why we recommend using a filter to trap these particles and improve the overall quality of your water.
The main water supply pipe is often oversized. This is why the system can be installed on pipes up to 32 mm in diameter, but the maximum water flow rate it can handle should not exceed 28 l/min, which corresponds to a pipe with an internal diameter of 25 mm.
If the water flow is higher or the water is harder, installing multiple units may improve efficiency.
For pipes with a diameter of 16 mm or less, you will need to wrap a few turns of electrical tape or similar around the pipe to compensate for any play.
How does a magnetic limescale remover work? Does it work? Do the magnets wear out? Does it remove limescale?
Download (6.61M)One of the shells of the system is already equipped with nuts, it must be placed on the wall side.


This system can be installed on all types of non-magnetic pipes.
They can therefore be used on plastic, copper, aluminium, etc. pipes.
You can check if your pipe is compatible with a small magnet or magnets on your fridge:
The solution if the hose is not compatible is to create a sleeve of about 10 cm with a compatible hose.
This can also be an opportunity to install a filter if you do not already have one.
The magnetic field does not pose any problem on other common electrical appliances, just beware of small devices such as watches, calculators or magnetic bank cards whose operation could be altered if they are placed nearby.
It is advisable to place the system as close as possible to the installation to be protected from limescale.
Beyond 40 metres the performance will be greatly reduced.
Magnetic limescale removers only act on the formation of limescale and do not instantly destroy the pieces that come from the water supply system.
They also do not act on sludge, sand and other impurities that also come from the water system.
In the long term, filings or iron particles could also accumulate in the magnet and negate its performance.
This is why the use of a filter is recommended to retain these elements and improve the overall quality of your water.


The general water supply pipe is often oversized, which is why the system can be installed on pipes up to 32mm but the maximum water flow that can be handled should not exceed 28l/min which corresponds to a pipe with an internal diameter of 25mm.
You can check this diameter if you wish with the calculation method described in our blog:
SIZING THE MAIN WATER PIPE IN A DWELLING
If the flow rate is higher or the water is more hard, the installation of several devices can improve efficiency.
*For a pipe with a diameter less than or equal to 16 mm, it will be necessary to provide a few turns of electrician's tape or other material to take up the slack.
(173)
(28)
(8)
(4)
(2)
(0)
La forme arrondi conçue pour épouser la forme des tubes créé un espace entre les aimants et atténue la sensation de puissance. Il suffit de mettre les anti calcaires dos à dos pour se rendre compte de là puissance.
Dans votre cas, c’est le calcaire qui s’était déjà formé qui se décroche. C’est parceque le système agit. Il faut alors nettoyer ce qui s’est décroché mais cela ne reviendra plus avant un long moment…
Merci de bien vouloir revenir et modifier votre avis dans quelques temps quand vous aurez constater que justement ça fonctionne.
Ce que vous croyez être un problème et juste la conséquence du nettoyage qui est en train de se produire.
Cordialement
Bonjour, pouvez vous nous contacter afin que nous puissions vous aider à faire fonctionner votre matériel ? Merci
Qui ne voudrait pas payer moins cher...?
Attention le calcaire déjà présent ne s'en va pas, aussi il faudra mettre un filtre pour plus d'efficacité.
Bonjour, il faudra attendre quelques semaines pour constater que le calcaire se reforme moins vite et qu'il est plus facile à nettoyer que du calcaire classique.(calcite contre aragonite.)
Bonjour, l'efficacité se voit sur du long terme. Disparition des plaques de calcaire, de robinets bouchés etc...
Il y aura toujours un dépôt mince qui se forme sur les resistances mais n'epaissit pas.
Même avec un adoucisseur à sel, du calcaire se forme dans une bouilloire. L'eau s'évapore, les minéraux restent...
Le calcaire qui se forme n'est plus incrustant. Il s'evacue avec la circulation de l'eau en restant en suspension dans l'eau.
Cordialement
Bonjour,
Notre système n'enlève pas le calcaire existant. Sur des éléments propres il revient beaucoup moins vite, sera beaucoup friable et facile à nettoyer.
Cordialement
Les résultats chez vous ne sont pas normaux ! il doit y avoir un problème. Vous ne répondez pas au téléphone alors que nous vous avons laissé un message, ni aux mails et ne comprenons pas votre refus d'aide pour trouver la raison de ce mauvais résultat ?!
Bonjour, nous n'avons pas validé votre commentaire.
Pourquoi attribuer une note inférieure à la moyenne des résultats actuels alors que vous n'avez pas d'opinion ?
La note que vous attribuez peut être changée par la suite, alors pourquoi attribuez vous une mauvaise note au produit ?
Nous validerons votre notation lorsque vous aurez une opinion réelle.
Cordialement
Bonjour, après notre conversation téléphonique, je vous confirme que l'adoucisseur a sel que vous aviez acheté chez un confrère ainsi que notre anti calcaire ne correspondent pas à ce que vous recherchez !
Vous êtes un grand amateur de thé et chercher une eau adaptée à votre passion.
Pour avoir une eau de meilleure qualité gustative ainsi que 0% de dépôts calcaire en la faisant bouillir, un osmoseur ou un filtre en ultrafiltration serait bien plus adapté. Vous pouvez aussi utiliser de l'eau déminéralisée.
Il est bon de rappeler que les adoucisseurs d'eau ou les anti calcaires :
Un adoucisseur à sel aura même tendance à modifier le goût de l'eau !
Cordialement
Bonjour, les aimants néodyme sont côtés en bourse et coûtent très cher, surtout en 12800 gauss c'est très rare. (aimants néodyme, dits en terre rare...)
Si nous pouvions utiliser des aimants en ferrite qui sont beaucoup moins cher nous le ferions mais ça ne fonctionne pas.
De même qu'on ne peut pas avoir de l'or au prix du plomb... sauf si on est magicien !
Le délai peu être plus long quand on commande avant le week-end ou pendant les périodes de fêtes.
| Disregard this box, which is not a product. The total will be updated at the bottom of the options and on the product price. |
| Automatic self-cleaning filter Equipped with a pressure reducer and pressure gauge
An upgradeable system |
| Allows you to create 2 filtration stages
Don't forget to order the appropriate 10" inch cartridges. |
| BPA-free modular filter holder- Bare model without connectors Can be used with standard 10" inch cartridges:
Cartridges and connectors can be seen at the bottom of the page |
| A simple, effective spanner |
| 3/4’ connectors (20-27) for modular filter Easily install your modular filter holder with these two 20/27 (3/4") connectors. |
| Double connector for modular filter Connect your modular filter holders together easily. |
| Filter cartridge centring device An essential accessory for filter doors. These rings make it easy to centre the filter cartridges so that they are properly aligned when reassembled. |
| Pack carbon filters + 10-micron sediment filters A cheap price for your activated carbon and sediment filter cartridges |
| A cheap price for your activated carbon and sediment filter cartridges |
| Pleated washable cartridge - 5 microns Washable, longer-lasting cartridges!
For standard 10" inch filter holder. |
| 5 micron sediment cartridge 10 inches Efficient deposit filtration.
For 10-inch filter holders. |
| Activated carbon cartridge Block 10 inch 10 microns Replacement cartridge for activated carbon filtration 10 µm.For 10 inch filter doors. |
| Mixed cartridge - activated carbon - sediment Unique filtration cartridge for the whole house!Ideal for use with a 1-tank water filter compact 2-in-1 cartridge:
The essentials of water treatment in a single filter cartridge. |
| Activated carbon cartridge - GAC Coconut granule activated carbonHigh-efficiency cartridge.
|
| Silver activated carbon cartridge - KDF GAC NS Bacteriostatic activated carbonAnti-bacterial.
Cartridge suitable for 10-inch filter doors. |
| Specifically designed to remove iron, manganese and hydrogen sulphide
|
| Anti-fluorine and arsenic cartridge - FLAR For 10-inch filter holder - FLAR
|
| 3/4 pressure reducer with pressure gauge connection Protect your household appliances, water heaters, boilers and heat pumps....- compact dimensions |
| Standard pressure gauge for drinking water 1/4" radial pressure gauge - DN 50 Ideal for mounting on our pressure regulator/limiter. |
No products
Prices are tax included