No products
Prices are tax included
Accessories for filters and purifiers
All useful and not always easy to find accessories are here:
spare filter cartridges
tap and quick-fit fittings for filters
aerators for swivel jet taps
3-way mixing valve for water purifiers...
-
1,80 € tax incl. 200 In Stock
It is very useful in plumbing:
- Preserves seals by preventing them from sticking
- Prevents oxidation of screws and nuts, making fittings easy to dismantle over time
- Facilitates the assembly of plastic or metal fittings
-
1,92 € tax incl. 137 In Stock
Hose for osmosis machine - water purifier - refrigerator.
Diameter 6.35 mm - 1/4 " inch.Sold by the meter.
-
2,50 € tax incl. 62 In Stock
1/4 fitting for plastic food pipes from 6mm to 6.5mm.
-
2,70 € tax incl. 187 In Stock
3/8 inch (12-17) connector for 6 mm to 6.5 mm plastic food hoses. (1/4 inch)
-
2,70 € tax incl. 200 In Stock
Automatic push-fit fitting - 90° elbow - for 6 mm to 6.5 mm (1/4 inch) plastic food pipes
-
2,70 € tax incl. 200 In Stock
3/8 inch (12-17) female fitting for 6 mm to 6.5 mm (1/4 inch) plastic food tubing
-
2,70 € tax incl. 399 In Stock
Straight push-fit fitting for 1/4 - 1/4 - plastic food pipe tolerances from 6 mm to 6.5 mm (1/4 inch)
-
3,00 € tax incl. 107 In Stock
Connect your modular filter holders together easily.
This accessory provides an instant seal without the need for screws or consumables. -
3,00 € tax incl. 122 In Stock
Install your modular filter holder easily with these 20/27 (3/4") connectors
These accessories allow you to adapt the 2 outlets of the filter holder to the screw pitch required for your project. -
3,00 € tax incl. 49 In Stock
Install your modular filter holder easily with these 26/34 (1") connectors
These accessories allow you to adapt the 2 outlets of the filter holder to the screw pitch required for your project. -
3,00 € tax incl. 49 In Stock
Install your modular filter holder easily with these 15/21 (1/2") connectors
These accessories allow you to adapt the 2 outlets of the filter holder to the screw pitch required for your project -
3,00 € tax incl. 50 In Stock
Install your modular filter holder easily with these 6mm (1/4") tube connectors
These accessories allow you to adapt the 2 outlets of the filter holder to the screw pitch required for your project. -
3,30 € tax incl. 184 In Stock
A simple, effective spanner
to loosen the tanks of your modular filters. -
4,20 € tax incl. 52 In Stock
Nipple, 3/4" connector (20/27)
A dedicated product for connecting a filter / filter holder
-
4,50 € tax incl. 70 In Stock
This type of fitting allows you to adapt a 3/8" tube to a 1/4" inch tube
3/8" corresponds to 9.52mm with a tolerance of approximately 8 to 10mm.
1/4" corresponds to 6.35mm with a tolerance of approximately 6 to 7mm -
4,80 € tax incl. 53 In Stock
An essential accessory for filter doors.
These rings make it easy to centre the filter cartridges so that they are properly aligned when reassembled.
-
5,30 € tax incl. 175 In Stock
Efficient deposit filtration.
- retains rust, sand and silt
- degraded structure technology - extended service life
- deep filtration effectively traps contaminants
- Technology that increases the effective filtration area
- cartridge replacement indicator
For 10-inch filter holders.
-
8,70 € tax incl. 15 In Stock
Washable, longer-lasting cartridges!
- eliminates sediments such as sand, silt and rust
- reusable (up to 6 times after washing)
- BPA (bisphenol) free
- higher flow rate (25 litres/minute)
For standard 10" inch filter holder.
-
9,00 € tax incl. 58 In Stock
The essential accessory for your tap
Treat yourself to a 360° swivel jet for your kitchen mixer.
-
9,60 € tax incl. 17 In Stock
The essential accessory for your filter.
Easily connect a water filter under your kitchen sink. -
9,60 € tax incl. 85 In Stock
This regulator protects water purifiers, osmosis units and other appliances.
Some homes don't have a pressure relief valve to protect their pipes, so this accessory is needed to prevent water hammer and excessive pressure in the pipes.
-
9,89 € tax incl. 150 In Stock
Replacement cartridge for activated carbon filtration 10 µm.
For 10 inch filter doors.
-
12,90 € tax incl. 39 In Stock
Unique filtration cartridge for the whole house!
Ideal for use with a 1-tank water filter
and those who are short of space.compact 2-in-1 cartridge:
- removes sediment down to 5 microns (sand, silt, rust, etc.)
- eliminates unpleasant odours from water
- eliminates bad taste from water
The essentials of water treatment in a single filter cartridge.
For standard 10" inch filter holder. -
14,70 € tax incl. 56 In Stock
Coconut granule activated carbon
High-efficiency cartridge.
Fits a 10-inch filter holder.- improves the smell and taste of water
- eliminates chlorine and pollutants
- more effective at adsorbing VOCs
- ideal as a complement to a block carbon cartridge
- pre-filtration of sediment to 5 microns
-
17,40 € tax incl. 13 In Stock
Specifically designed to remove iron, manganese and hydrogen sulphide
- removes rotten egg smell
- removes brown discolouration from water
- prevents the formation of rust stains
- removes iron and manganese compounds from water
- 5 μm pre-filtration eliminates mechanical impurities
-
17,40 € tax incl. 43 In Stock
Bacteriostatic activated carbon
Anti-bacterial.
- activated carbon from coconut shells (NSF certified).
- Silver impregnated - inhibits bacterial growth. (KDF)
- removes unwanted impurities from water
- improves taste and smell
Cartridge suitable for 10-inch filter doors.
-
19,80 € tax incl. 19 In Stock
For 10-inch filter holder - FLAR
- effectively eliminates arsenic
- eliminates fluorides and heavy metals
- longer contact between the fluid and the water improves filtration quality
- made in Central Europe - Poland
- highest quality guaranteed
- the product is totally safe
-
29,90 € tax incl. 10 In Stock
With this appliance, we're declaring war on limescale deposits in your washing machine and dishwasher.
- easy to use by screwing it onto 1 tap
- prevents the formation of limescale
- softer linen
- cleaner dishes
- A simple, durable product
-
33,60 € tax incl. 42,00 € 69 In StockReduced price!
Special tap for purifier or osmosis plant
Made of lead-free 304 stainless steel - anti-fingerprint treatment. -
38,40 € tax incl. Victim of its own success - you can pre-order the article will be available soon
Cette clef vous permettra de visser/dévisser la cartouche de votre purificateur d'eau 4 en 1 pour la remplacer.
English 
Français 
Deutsch 
Italiano 
Español 
Polski 
Türkçe 
Svenska 
Nederlands 
Belgium