Connect your modular filter holders together easily.
This accessory provides an instant seal without the need for screws or consumables.
Easily install your modular filter holder with these two 20/27 (3/4") connectors.
These accessories allow you to adapt the two outlets of the filter holder to the thread size required for your project.
Easily install your modular filter holder with these two 26/34 (1") connectors.
These accessories allow you to adapt the two outlets of the filter holder to the thread size required for your project.
Easily install your modular filter holder with these two 15/21 (1/2") connectors.
These accessories allow you to adapt the two outlets of the filter holder to the thread size required for your project.
Easily use your modular filter holder with these two 6 mm (1/4") tube connectors.
These accessories allow you to adapt the two outlets of the filter holder to a 1/4" automatic connector.
A dedicated product for connecting a filter / filter holder
It is very useful in plumbing:
Find the water filters, filter housings, fittings and accessories you need to build a customised installation, replace a component or upgrade an existing filtration system without purchasing a complete kit.
A modular filter housing can accept different cartridges and can be installed on its own or combined with several housings. A self-cleaning filter can also be used as a pre-filter to retain larger particles.
Double connectors make it possible to combine several filter housings to create a duplex, triple or more complete multi-stage filtration system.
The different fittings allow the filter inlet and outlet to be adapted to the main plumbing sizes: 1/2", 3/4", 1" or 1/4" tubing depending on the installation.
Housings, filter keys, cartridge centring devices, seals and other accessories make it possible to maintain and repair an installation without unnecessarily replacing the complete filter.
A modular installation allows you to start with a simple system and add one or more stages later as your requirements change. The number of housings alone does not determine the type of treatment: it is mainly the cartridges installed in each filter that define the function of the system.
When installing a filter housing, it is important to check the network pressure as well as the flow rate required by the home. A pressure gauge allows you to monitor the pressure, while a pressure reducer can be added if it is too high.
Filter cartridges are grouped in a dedicated category to make it easier to choose between sediment, activated carbon, combination cartridges and specialist treatments.
View water filter cartridges