Equipped with a pressure reducer and pressure gauge
Countercurrent washing without water shut-off.
Advantages:
An upgradeable system
Optional: add the electronic box to automate backwashing
An essential accessory for its self-cleaning filter.
This electronic unit automatically triggers the backwash, so all you have to do is forget about it...
It is mains-powered and battery-powered.
- compact dimensions
- versatile installation direction
- with pressure gauge connection
- 3/4 (20/27) female threads
1/4" radial pressure gauge - DN 50
Ideal for mounting on our pressure regulator/limiter.
Allows you to quickly check the pressure in your water network.
- Graduations from 0 to 16 bar
- Bare model without connectors
- remember to add accessories
Can be used with standard 10" inch cartridges:
Cartridges and connectors can be seen at the bottom of the page
A simple, effective spanner
to loosen the tanks of your modular filters.
An essential accessory for filter doors.
These rings make it easy to centre the filter cartridges so that they are properly aligned when reassembled.
You've dropped your bowl and it's broken.
Here's the complete replacement part:
- the bowl (BPA-free)
- the O-ring
- the purge complete with locking shim
- the clamping locking system
Find the water filters, filter housings, fittings and accessories you need to build a customised installation, replace a component or upgrade an existing filtration system without purchasing a complete kit.
A modular filter housing can accept different cartridges and can be installed on its own or combined with several housings. A self-cleaning filter can also be used as a pre-filter to retain larger particles.
Double connectors make it possible to combine several filter housings to create a duplex, triple or more complete multi-stage filtration system.
The different fittings allow the filter inlet and outlet to be adapted to the main plumbing sizes: 1/2", 3/4", 1" or 1/4" tubing depending on the installation.
Housings, filter keys, cartridge centring devices, seals and other accessories make it possible to maintain and repair an installation without unnecessarily replacing the complete filter.
A modular installation allows you to start with a simple system and add one or more stages later as your requirements change. The number of housings alone does not determine the type of treatment: it is mainly the cartridges installed in each filter that define the function of the system.
When installing a filter housing, it is important to check the network pressure as well as the flow rate required by the home. A pressure gauge allows you to monitor the pressure, while a pressure reducer can be added if it is too high.
Filter cartridges are grouped in a dedicated category to make it easier to choose between sediment, activated carbon, combination cartridges and specialist treatments.
View water filter cartridges