No products
Prices are tax included
Equipped with a pressure reducer and pressure gauge
Countercurrent washing without water shut-off.
Advantages:
An upgradeable system
Optional: add the electronic box to automate backwashing
- Bare model without connectors
- remember to add accessories
Can be used with standard 10" inch cartridges:
Cartridges and connectors can be seen at the bottom of the page
You've dropped your bowl and it's broken.
Here's the complete replacement part:
- the bowl (BPA-free)
- the O-ring
- the purge complete with locking shim
- the clamping locking system
An essential accessory for filter doors.
These rings make it easy to centre the filter cartridges so that they are properly aligned when reassembled.
A simple, effective spanner
to loosen the tanks of your modular filters.
Connect your modular filter holders together easily.
This accessory provides an instant seal without the need for screws or consumables.
Easily install your modular filter holder with these two 20/27 (3/4") connectors.
These accessories allow you to adapt the two outlets of the filter holder to the thread size required for your project.
Easily install your modular filter holder with these two 26/34 (1") connectors.
These accessories allow you to adapt the two outlets of the filter holder to the thread size required for your project.
Find the filtration equipment, filter housings, fittings and accessories needed to build a customised installation, replace a component or complete a system designed for rainwater, spring, borehole or well water.
A self-cleaning filter can be installed upstream to retain sand, rust, deposits and other larger particles before the finer filtration stages.
Modular filter housings can be used individually or combined to create double, triple or multi-stage filtration systems.
Connectors and fittings allow the equipment to be adapted to common plumbing sizes, including 1/2", 3/4", 1" and 1/4" tubing.
Filter housings, keys, cartridge centring devices, silicone grease and automation accessories make it possible to maintain the system and replace only the parts that are needed.
Rainwater, borehole, spring or well water may require several successive treatment stages. The appropriate configuration depends on water quality, the required flow rate and the intended use.
Fitting sizes should remain consistent with the pipework and required flow rate. A fitting that is too small can increase pressure loss and unnecessarily restrict available flow.
Sediment, activated carbon, combination cartridges and specialist treatments are grouped in a dedicated category.
View filter cartridgesFor microbiological treatment, discover our UV sterilizers together with lamps, quartz sleeves and maintenance parts.
View UV sterilizersClear water is not necessarily suitable for every use. For well, borehole or spring water, an analysis helps identify the parameters present and determine the appropriate treatment stages.
No products
Prices are tax included