No products
Prices are tax included
Complete filtration pack with 25 W UV sterilizer for rainwater, borehole water, well water or spring water. A solution particularly suited to a home with up to 4 to 5 people, 1 bathroom and moderate simultaneous water use.
A suitable choice for a standard domestic installation with moderate flow requirements. For several bathrooms or higher simultaneous water demand, choose the 55 W UV pack.
Complete high-flow filtration pack with 55 W UV-C sterilizer for rainwater, borehole water, well water or spring water. This version is designed for installations requiring higher treatment capacity, several water outlets or greater simultaneous water demand.
The preferred version for homes or installations requiring greater treatment capacity. Actual system flow also depends on the filters, cartridges, pipework, pump and other equipment installed upstream.
Complete filtration pack for rainwater, borehole, well or spring water combining a self-cleaning pre-filter with a triple 10-inch water filter. A flexible solution designed to protect the installation, remove fine particles and improve overall water quality.
A practical solution for domestic filtration of rainwater, borehole, well or spring water. If microbiological treatment is required, a UV sterilizer can be added after the filtration stages.
Do you want to filter or treat rainwater, spring water, borehole water or well water for use in your home? Unlike mains water, water from a private source can vary considerably in quality. The treatment should therefore be adapted to the actual water quality and its intended use.
Depending on your needs, the installation can combine pre-filtration, several filtration stages with suitable cartridges and, where required, UV disinfection.
This configuration provides an initial stage for removing larger impurities followed by multi-stage filtration. The cartridges used in the duplex filter should be selected according to the water quality and the substances that need to be retained.
Filtration can be complemented by UV treatment when additional microbiological protection is required. The UV system should be sized according to factors such as the installation flow rate and the intended use of the water.
For installations requiring a higher flow rate, a more powerful UV system can be used to adapt the treatment to the characteristics of the installation.
Water used only for garden irrigation, toilets or certain technical purposes does not necessarily require the same level of treatment as water used for showering or other applications involving human contact.
For more sensitive uses, microbiological water quality must also be considered, and UV treatment may be required as part of the installation.
The composition of borehole, spring or well water can vary significantly from one site to another. A water analysis helps identify the parameters that need to be treated and select the most appropriate cartridges or additional equipment.
Thanks to the modular design of our systems, additional filtration stages and specific-purpose cartridges can be added when the characteristics of the water require them.
No products
Prices are tax included